Want to reface your kitchen cabinets? Smart decision. Kitchen refacing is more cost effective and takes less time than a full remodel. Here are options and costs.
By Jan Soults Walker
Custom cabinet refacing by The Cabinet Restoration Company in Manchester, Md.
Refacing your kitchen cabinets includes covering the exposed frames with a thin veneer of real wood or plastic laminate. Doors and drawer fronts are replaced to match or complement the new veneer. New hinges, knobs, pulls, and molding complete the transformation.
What Are the Pros and Cons?
Kitchen cabinet refacing pros:
• Costs about half as much as replacing cabinets.
• Takes less time (a week or less!) and money.
• It's less hassle than tearing out cabinets.
• You can still use your kitchen while refacing.
• It's a green kitchen remodeling solution because you're not adding to the landfill.
Kitchen cabinet refacing cons (there aren't many):
• Refacing won't fix a bad kitchen design.
• You might be tempted to spend more on exotic veneer and hardware (saving you less).
What Are Your Refacing Options?
Your choices for the finished look of your cabinets are virtually limitless. Veneers are available in a wide variety of colors, patterns, textures, grains, and more, which you can mix or match to get a relatively low-cost kitchen facelift.
• Rigid thermofoil (RTF) doors, which feature a durable plastic coating over fiberboard, are an affordable alternative to wood or laminate doors.
• Plastic laminates come in hundreds of colors and patterns, are durable and moisture-resistant, and are reasonably priced. You can pick matching or contrasting laminates for your doors and drawer fronts.
• Real wood veneers include many standard species, such as oak, cherry, and maple, and you also can choose from an array of stain colors. Wood veneers are the most expensive option. Wood must be carefully sealed to protect against moisture.
Further customize and update the look of your cabinets with new kitchen cabinet hardware.
What Does Refacing Cost?
A professional cabinet refacing for a typical 10-by-12-foot kitchen starts at around $1,000-$3,000 for laminate. Expect to pay $2,500-$6,000 for real wood veneer. Costs can rise to $7,000-$9,000 or more for a large project with high-quality wood veneer.
Finishing the project with new hardware (pulls, knobs, hinges) runs $2-$4 per piece, up to $20-$50 each for high-end hardware.
In comparison, completely replacing old kitchen cabinets with new cabinets starts at $4,000-$5,000 and up for stock cabinets; $8,000-$10,000 for semi-custom cabinets; $16,000-$20,000 and up for custom-made cabinetry.
How Do I Know If My Cabinets Are Good For Refacing?
Refacing is feasible if your existing cabinet boxes are structurally sound and in good condition. Cabinets with water damage, warping, and broken frames are poor candidates. Particleboard cabinetry sometimes requires fasteners, in addition to adhesives, to ensure that the veneer is secure.
How Are They Installed?
A professional installer will come to your house to measure your cabinets and determine the amount of veneer required, the correct sizes and quantities for door and drawer fronts, and how much hardware is needed. Newly ordered doors and drawer fronts may take one to two weeks for delivery.
When all the materials are in hand, your installer removes old cabinet door and drawer fronts, and prepares the surface of the cabinet boxes by washing the exteriors with a degreaser and lightly sanding the finish. Any significant flaws in the surface are repaired or filled to ensure a smooth, secure fit for the new veneer.
The installer applies veneer to the cabinet faces and any exposed cabinet ends, then mounts the new doors, drawer fronts, and hardware. The process typically takes two to four days.
Visit HouseLogic.com for more articles like this. Reprinted from HouseLogic.com with permission of the NATIONAL ASSOCIATION OF REALTORS®.
The McKenna Group shares an article about home improvement, home maintenance or home design every Monday. Is there something that you'd like to learn about or a type of article you'd like to see? Contact us here, or stop by our Howard County office in Columbia or our Carroll County office in Mount Airy. #HoCoBlogs